Briggs and Stratton Lawn Mower Oil Capacity

Briggs and Stratton is a popular name and are the major suppliers of lawnmowers. It is best to know the mower’s oil capacity for maintaining the mower to avoid further hassles during the lawn mowing process. However, the question arises about the oil capacity of Briggs and Stratton’s oil capacity and how much oil for lawn mower is suitable. 

This comprehensive guide covers information on specific oil types and the capacity of the mower that you will need to get optimum working conditions. A handy oil capacity chart for popular models is provided along with the step-by-step process of changing the oil in a lawn mower.

Briggs and Stratton Oil Capacities

There are different and proper oil capacities for all lawnmowers. If you were searching for Briggs and Stratton oil capacities, remember that the value varies on various factors. Every lawn mower needs almost 1.5 liters of oil, equivalent to 2 bottles. A synthetic blend oil is perfect for lawnmowers.

The main factor you must consider is its type and what engine fits in your lawn mower. Environmental temperature always significantly affects oil, so knowing the precise amount needed for your lawn mower is essential. 

Briggs and Stratton Oil Capacity Chart

Here is the table showing the oil capacity of Briggs and Stratton’s different lawnmowers. Search for the lawn mower you are using and see how much oil you need to fill your Briggs and Stratton mower.

What Kind of Oil Does the Briggs And Stratton Engine Hold

If you were searching for which type of oil would be best for your Briggs and Stratton engine, use SAE 30W oil over 40F for any lawn mower. You can also use this oil for a 12hp series engine. 

To maintain the mower’s excellent performance, you must change its oil after every fifty hours. Following this, you can use your lawn mower for many years without any engine trouble. 

If you mow your lawn every day or after two days, regularly check the oil level before and after use. When you fill the oil cylinder, ensure it only meets the oil capacity; do not overfill it, as it can burn the engine around. 

Changing of Oil In Tthe Lawn Mower

To change the oil in your lawn mower consists of various steps. We have divided the process into different steps to make this easily understandable for you. So, follow the steps carefully:

Start Process of Oil Change

• First, start your mower engine to warm it. 
• After a few minutes, stop the engine and disconnect the spark plug cable.
• Put the spark plug cable away from the plug. 
• Clean the oil cap to stop dirt from reaching the crankcase. 
• If your engine has a dipstick, remove it. 

Draining the Oil in an Engine

• Tilt your mower slightly to make the spark plug and air filter side upward.
• You have to place an oil pan or any paper under the mower; it will prevent the ground from being oily.
• Get a 3/8-inch socket wrench and use it to turn the plug in an anticlockwise direction to drain the oil.
• After the process, turn the plug clockwise to tighten it. You can skip the process if there is no air filter in your mower’s engine.

Checking the Oil Filters

• It is necessary to change the oil filter once a season if there is any oil filter in your lawn mower. 
• Turn your air filter in an anticlockwise direction to loosen it and separate it from the engine. 
• Check if there is any dirt on the sealing surface of the oil filter, then clean it. 
• While replacing the new oil filter, lightly oil it with new engine oil. Install the new oil filter into the engine by turning it clockwise. 

Filling New Oil

• After installing the new oil filter, add the oil into the engine cylinder according to your mower’s capacity or up to the dipstick mark. 
• Check if your mower engine has two oil plugs; if there are, you can use either one to fill the oil. 
• Walk-Behind Mowers
• Walk-behind mowers have approximately 15oz to 18oz oil capacity.
• You must change the oil after 50 hours or once a year, whatever suits you. 

 Oil Change in Riding Mowers

• Riding mowers have approximately 48oz to 67 oz oil capacity.
• You must change their oil engine after 100 hours of use or at least once a year, which suits you. 
• Remember to fill the Briggs and Stratton engines with oil. Adding extra oil will produce more heat in the engine than usual, which can be dangerous for lawnmowers. It can also affect the crankcase, and if it does, you must remove it from the engine immediately. 

Conclusion

If you use a Briggs and Stratton lawn mower, you may wonder how much oil it needs and how long it takes to change. This article provides accurate and precise answers. We have described how much oil you must fill according to your mower type in a chart. In addition, the detailed step-by-step oil change process is also elaborated. Read the article until the end and get efficient working from your lawn mower. 

FAQs

1. What Is the 3.5 Hp Briggs and Stratton Lawn Mower Oil Capacity?

The oil capacity of the 3.5hp Briggs and Stratton mower is approximately 15oz to 18oz. So, always remember to fill in oil according to their oil capacity. Change the oil after 50 hours or at least once a year.

2. What Is the Craftsman 6.5 Hp Briggs and Stratton Lawn Mower Oil Capacity?

The Craftsman 6.5hp Briggs and Stratton lawn mower needs 20 ounces of engine oil. Some Craftsman models have four cycles; each cylinder needs 20 ounces of oil to perform efficiently. 

3. Can You Fill Extra Oil in the Mower Engine?

Filling the engine with extra oil or more than the capacity will cause various problems. First, it will stop the engine from working efficiently. Too much oil in the engine causes overheating in the system, which causes blown gaskets and seal damage.